DC DC57-42A CP IS Pot & Utensil Washer Pot & Utensil Washer 570×620

£3,107.50

+vat

Brand:

SKU: DC57-42A CP IS

Product summary

Product description

High Performance Pot Washers – Specifically designed to accommodate a wide range of pots, pans, utensils, containers, gastronorm and baking trays. Comes with chemical pumps, integral softener, variable (and customisable) cycle times, break tank, double skinned construction and simple, intuitive user interface.

A pot and utensil washer with integral water softening, protecting your gastronorm pans and kitchen ware from hard-water spotting while maintaining consistent detergent performance.

Downloads

SPECIFICATION 16 facts · tap for all External W × D × H670x725x1368mmWidth670 mmDepth725 mmInput power32Product codeDC57-42A CP ISTypePot Washers

Identity3

Brand DCsite
Product code DC57-42A CP ISsite
Type Pot Washerscatalogue

Size & weight5

Depth 725 mmsite
External (W×D×H) 670 × 725 × 1368 mmcatalogue
External W × D × H 670x725x1368mmsite
Height 1368 mmsite
Width 670 mmsite

Capacity1

Wash height 420 mmcatalogue

Power & energy1

Input power 32site

Build & fittings1

Double skinned Yescatalogue

Other stated facts5

Basket size 570×620catalogue
Cycle times s 60 120 180 480catalogue
Drain outlet height 65 mmcatalogue
Water flow min 10 l/mincatalogue
Water pressure min 2-4 bar (28-56 psi)catalogue
THE WORKING VIEW

Why this pot washer earns its place

The DC57-42A CP IS is designed for kitchens in hard-water areas — locations where untreated mains water would spot and film pans, glasses and utensils no matter how well you wash them. The integral softener strips out the calcium and magnesium before it reaches the wash chamber, so your pots come out spot-free every time and your detergent works at full strength.

This isn't just about aesthetics. Hard water interferes with detergent chemistry, meaning you get incomplete cleaning or have to overdose chemicals to compensate. With integrated softening, you're using the right amount of detergent correctly — better results and lower chemical spend over time.

The rest of the package is familiar: double-skinned cabinet, automatic chemical pumps for consistent dosing, customisable cycle times, and a break tank to keep wash water stable. It handles everything a full kitchen throws at it — pots, pans, utensils, containers, gastronorm trays and baking equipment.

BEFORE YOU BUY

Questions, answered straight

It uses ion exchange to remove calcium and magnesium from incoming mains water before the water enters the wash chamber — a standard, proven method that requires periodic regeneration with salt.

It's designed to work across typical UK hardness ranges. For very extreme hardness, your water supplier or our technical team can advise on salt cartridge capacity and regeneration frequency.

Yes, the softener uses salt for regeneration. Depending on your water hardness and usage, you'll typically refill the salt reservoir every few weeks. It's a simple, straightforward task.

In hard-water areas, many operators see a reduction of 20–40% in detergent consumption because the softened water lets detergent work at design strength rather than requiring overdosing.

No — it has the same double-skinned cabinet, automatic chemical pumps, customisable cycles, and break tank. The only addition is the water softening system.

Contact 01792 732702 — they can advise on salt availability and any maintenance the softener might need.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC DC57-42A CP IS Pot & Utensil Washer Pot & Utensil Washer 570×620 Product Data

Dimensions (W×D×H) 670 × 725 × 1368 mm
Power supply 32
Basket size 570×620
Cycle times 60 120 180 480
Usable wash height 420 mm
Double skinned Yes
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 65 mm
If you have any questions about the DC DC57-42A CP IS Pot & Utensil Washer Pot & Utensil Washer 570×620 then please get in touch.

You may also be interested in...