Why this salamander grill earns its place
The Roller Grill SGM 800 is a proper gas grill for kitchens that run on LPG and need straightforward, dependable heat. Twin radiant burners deliver even heat distribution—no hot edges or cold centres—and the burners sit where you can adjust them for intensity. Want a fierce sear on steaks? Wind them up. Need gentle finishing on fish? Turn them down. That flexibility is what radiant burners give you.
The grill opens on three sides, which matters more than it sounds. You're not sliding pans in and out of a narrow slot; you've got access from multiple angles, so you can load, turn, finish, and pull without contorting. At 800 mm wide and 590 mm deep, it's a full-size pass grill that matches the 1/1 GN cavity. The height adjustment means you can dial in the exact working height for your team and the dishes you're running most.
At 57 kg, it's solid but not immovable. On LPG, it's independent of mains electricity—if your pass doesn't have a three-phase feed, or you're fitting out a unit with no spare capacity, gas is your route. The 2-year warranty includes parts and labour, and Craven can advise on gas installation and safe pipework setup.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
