DC SG45 D Standard Glasswashers – frontloading 450×450

£1,386.00

+vat

- +

Brand:

SKU: SG45 D

Product summary

Product description

Drain pump – Two minute cycle, energy-saving wash pump, superior peristaltic auto-dosing units, moulded hydro-dynamic basket runners, double skinned, two glass baskets, engineer diagnostic mode. Programmable options: rinse thermolock, auto-start door, audio status indicator, integral softener (when fitted).

Downloads

THE WORKING VIEW

Why this dishwasher earns its place

The SG45 D sits in the middle ground: bigger than the SG40, smaller than the SG50, with a 450 mm basket that balances volume with counter space. Two-minute wash cycles mean glassware doesn't linger—turn the basket, load it, and it's clean before the next service rush hits. You get two glass baskets to rotate, so the rhythm is constant: empty, reload, repeat.

The engineering is straightforward and proven. A drain pump handles the waste (rather than gravity drain), giving you more flexibility in where you position the unit. The wash pump is energy-saving by design, and the superior peristaltic auto-dosing system means your detergent spend is precise, not guessed. Moulded hydro-dynamic basket runners work with the wash action to ensure every glass comes out clean. The double-skinned cabinet keeps heat in and noise out—important in a public-facing environment.

Built-in diagnostics make troubleshooting simple: you know whether it's a refill issue or something more. Programmable options let you customise the wash: add rinse thermolock for spotless dry, auto-start door for convenience during service, audio alerts if you prefer to hear when cycles finish, or integral softening if your water hardness demands it. It's a solid, no-nonsense machine.

DELIVERY FITSTATED GEOMETRY
Will it reach the final position?

Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.

THE MACHINE

525 × 545 × 690 mmstated W × D × H
THE CRITICAL ANSWERNarrowest straight opening525mm

Stated machine geometry while kept upright. Allow handling room and confirm the complete route.

LONG SIDE AT TURNS690 mmCheck corners and landings
YOUR DOORWAYLIVE CHECK

Measure the clear opening

Enter the usable gap with the door fully open.

This checks straight stated geometry only.

THE WASH-UP LINE31 PRODUCTS
Match the machine to the service

Undercounter to pass-through — the whole wash-up range at live catalogue prices.

BEFORE YOU BUY

Questions, answered straight

Each basket cycles in two minutes. With two baskets rotating, you're looking at 30 baskets per hour running continuously—the constraint is unloading and reloading speed, not the machine. Your actual throughput depends on volume per basket and staff efficiency.

The drain pump gives you flexibility: you can position the machine on a bar, against a wall, or in a corner without worrying about gravity drain slope. It's also more reliable in kitchens where drainage can be unpredictable. The trade-off is minimal—it's a standard component that lasts the life of the machine.

Integral softening is available as a fitted option, and it's the simplest solution. Alternatively, you can use rinse thermolock programming—running the final rinse at the optimal temperature dramatically reduces spotting on hard water.

Weekly: empty the trap, check detergent and rinse aid levels. Monthly: clean basket runners, inspect the drain pump intake. The engineer diagnostic mode flags issues early—if something's not right, it tells you. Ring 01792 732702 for servicing or detailed guidance.

The wash temperature runs automatically for the standard cycle. Programmable options include rinse thermolock, which controls the rinse temperature for spot-free drying. If you need customised wash temperatures for specific glassware types, that's a conversation with our team—01792 732702.

The numbers that decide it

Service pace

Basket size 450×450
Cycle times s 120 sec
Placeapacity 25

Water & tank

Water per cycle 2.4 L litres
Water pressure min 2-4 bar (28-56 psi)
Water flow min 10 l/min
Wash tank 18 L
Boilerapacity 2.8 L

Chamber & baskets

Wash height 310 mm
Supplied baskets 2

Power & supply

Power supply 13 amp
Totaload 3 kW
Wash element 1.6 kW
Rinse element 2.8 kW

Format & size

External (W×D×H) 525 × 545 × 690 mm
Width 525 mm
Depth 545 mm
Height 690 mm

Build

Double skinned Yes
Counter balanced door No
Filterount 2

Identifiers

Brand DC
Type Commercial Glasswashers
Supplier ref SG45 D
Supplier name DC Feed
Drain outlet height 120 mm
KNOW YOUR KIT BEFORE YOU BUY

Tools that do the maths

Pick the machine, count the true cost, and plan the routine it joins.

3 TOOLS

See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC SG45 D Standard Glasswashers – frontloading 450×450 Product Data

Dimensions (W×D×H) 525 × 545 × 690 mm
Power supply 13 amp
Basket size 450×450
Capacity (dishes/glasses) 25
Cycle times 120 sec
Usable wash height 310 mm
Wash tank capacity 18 L
Boiler 2.8 L
Water consumption 2.4 L
Wash element 1.6 kW
Rinse element 2.8 kW
Total load 3 kW
Double skinned Yes
Counter-balanced door No
Filters 2
Supplied baskets/racks 2
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 120 mm
If you have any questions about the DC SG45 D Standard Glasswashers – frontloading 450×450 then please get in touch.

You may also be interested in...