DC PG50A IS D Premium Glasswashers – frontloading 500×500

£2,420.00

+vat

- +

Brand:

SKU: PG50A IS D

Product summary

Product description

Break tank, integral water softener & drain pump – Two minute cycle, heavy-duty wash pump, low-volume wash tank, superior peristaltic auto-dosing units, insulated cabinet and door, insulated boiler, double skinned, extra usable wash height, two glass baskets, engineer diagnostic mode. Programmable options: rinse thermolock, auto-start door, audio status indicator, integral softener (when fitted).

The fully independent compact glasswasher: 500 × 500 mm with integrated water softening and drain pump for venues with hard water and non-standard plumbing.

Downloads

SPECIFICATION 24 facts · tap for all External W × D × H605x635x840mmWidth605 mmDepth635 mmInput power30 ampProduct codePG50A IS DBrandDC

Identity3

Brand DCsite
Product code PG50A IS Dsite
Type Commercial Dishwasherscatalogue

Size & weight5

Depth 635 mmsite
External (W×D×H) 605 × 635 × 840 mmcatalogue
External W × D × H 605x635x840mmsite
Height 840 mmsite
Width 605 mmsite

Capacity1

Wash height 345 mmcatalogue

Power & energy4

Input power 30 ampsite
Rinse element 4.5 kWcatalogue
Totaload 6.55 kWcatalogue
Wash element 2 kWcatalogue

Build & fittings2

Double skinned Yescatalogue
Filterount 2catalogue

Other stated facts9

Basket size 500×500catalogue
Boilerapacity 5 Lcatalogue
Cycle times s 60 90 120 180 User Definedcatalogue
Drain outlet height 80 mmcatalogue
Placeapacity 30catalogue
Wash tank 12 Lcatalogue
Water flow min 10 l/mincatalogue
Water per cycle 2.6 L litrescatalogue
Water pressure min 2-4 bar (28-56 psi)catalogue
THE WORKING VIEW

Why this commercial dishwasher earns its place

The PG50A IS D is the top-spec variant—it solves the two biggest installation and water-quality problems in one machine.

First, hard water. In many UK venues, mineral-rich water leaves glasses spotted and cloudy no matter what you do. The integral water softener built into the IS D removes that problem entirely. Soft water rinses properly, so glasses come out clear and professional every time.

Second, plumbing. Not every venue has a drain in the right place. The integrated drain pump means you can install the machine wherever it flows best for your operation—back of the bar, a side counter, an upper-level function room. No gravity slope required. The pump handles discharge automatically.

BEFORE YOU BUY

Questions, answered straight

Not everyone does. If your water is soft and you have good drainage, the base PG50A is fine. But in hard-water zones with tricky plumbing, both upgrades solve real daily problems. The IS D is the answer to "we have both of those issues."

500 × 500 mm is the machine footprint. The drain pump doesn't add physical bulk. Check your counter depth and height; the machine is compact by design.

If you have a floor drain or waste within a reasonable slope, gravity works. But if that's not possible or it's across the room, the pump removes the headache of custom plumbing.

Yes. It regenerates automatically, and salt top-ups are quick, infrequent tasks (weekly or fortnightly depending on hardness). No special maintenance beyond that.

Once per wash—at the end of the cycle. It's barely audible and runs for seconds.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC PG50A IS D Premium Glasswashers – frontloading 500×500 Product Data

Dimensions (W×D×H) 605 × 635 × 840 mm
Power supply 30 amp
Basket size 500×500
Capacity (dishes/glasses) 30
Cycle times 60 90 120 180 User Defined
Usable wash height 345 mm
Wash tank capacity 12 L
Boiler 5 L
Water consumption 2.6 L
Wash element 2 kW
Rinse element 4.5 kW
Total load 6.55 kW
Double skinned Yes
Counter-balanced door Yes
Filters 2
Supplied baskets/racks 2
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 80 mm
If you have any questions about the DC PG50A IS D Premium Glasswashers – frontloading 500×500 then please get in touch.

You may also be interested in...