Why this four door counter fridge earns its place
The Refrigerated Counter Upstand 4 Doors is a four-door refrigerated prep counter fitted with a rear upstand — a raised lip along the back of the work surface. At 2230 mm wide with a 1665 mm internal working width, it delivers a full bench run of chilled prep storage right at the line. The cabinet holds steady chilled working temperature (−2 to +8 °C) behind four hinged doors with a continuous worktop above, and the stainless steel 18/8 upstand keeps splashes and spills off the wall where the counter runs against one. It gives a busy kitchen long cold storage real estate, with the interior split into four sections a brigade can organise by station or by service.
Day to day the counter is worktop and cold store in one: prep on top, restock from the doors below, and reset the surface between services. Four separate doors mean staff open only the section they need, which limits cold loss and helps the cabinet hold temperature through a long shift. Ventilated cooling keeps the temperature steady under a full load, and the quiet 42 dB(A) operation means the condenser barely registers in a busy service. Keep internal airflow clear and clean the condenser on a routine so the unit keeps pulling temperature reliably.
The rear upstand in stainless steel makes this counter well suited to a wall-side run, where it protects the wall from splashes and simplifies daily wipe-down. This model measures 2230 mm wide, 700 mm deep and 850 mm high — a substantial bench-run unit that weighs 190 kg, so plan your delivery route and floor strength accordingly. Stand it on a level floor with clearance around the condenser, and plan how the four doors swing against your kitchen traffic. Speak to Craven Cooling if you want it matched to an existing bench line or fitted into a specific kitchen run.
