Why this beer fridge earns its place
The Gamko MG3/300RG CE562 is an upright bottle cooler from Gamko's back-bar range, finished in anthracite. It is built to stand behind the bar and hold bottled beer, wine, mixers and soft drinks cold and within reach during service. At just 602 mm wide and 530 mm deep, it fits into the tightest back-bar gaps where a twin-door cabinet cannot. The upright format stacks 300 litres of capacity into that narrow footprint across five shelves, so a busy bar keeps chilled stock at the pass without spreading sideways along the back wall.
At 104 kg, it is significantly lighter than larger models — important if floor loading or installation logistics are tight. The door is right-hinged, which sets how the cabinet fits at the end of a run and which side staff open it from. It holds +2 to +18 °C and runs at 52 dB(A) — genuinely quiet for front-of-house. The cabinet uses eco-friendly R600a refrigerant, and it runs on a standard 230V supply.
As an upright back-bar unit the MG3/300RG is free-standing and needs floor space rather than an under-counter recess. At 1.8 metres tall, check that height against any overhead shelving. Confirm the width (602 mm) and depth (530 mm) fit the gap behind your bar before ordering. It carries a 2-year on-site warranty covering parts and labour.
