Warewashing selector

Stop guessing. Match your peak rush to the right dishwasher class.

Tell it what lands in the sink, how hard the rush hits, and what the kitchen can physically take. The result is a class verdict, capacity slack, finance framing and live Craven machines.

3-4racks/hour is the common machine trigger in Craven’s guide
40-60racks/hour is hood or pass-through territory
82°Cfinal rinse benchmark for sanitising

01 / What are you washing?

02 / Peak pressure

This drives the verdict. Craven’s guide says size by peak racks/hour, not just daily covers.
Used only to sanity-check racks. Craven’s worked example uses about 18 covers per mixed rack.
Live cards show real prices; finance appears when a live item is above £1,000.

03 / Installation reality check

Your result
Right-sized
Undercounter dishwasher

Your peak sits above hand-washing but below pass-through pressure.

Peak demand12/hr
Recommended capacity40/hr
Capacity slack28/hr
Rush pressure map12 of 40
Your peak
30%
Machine
100%
Slack
70%
The selector leaves headroom for the dirty-rack spike at the end of service.
Bar path

Glasswasher

For mostly glassware, especially bar service.

  • Live category: commercial glasswashers
  • Some Craven products state 25 pint glasses per rack and up to 1000 glasses/hour
Compact path

Undercounter dishwasher

For cafes, small restaurants and mixed dishwashing where space matters.

  • Craven guide trigger: around 3-4 racks/hour
  • Product data commonly shows 500 x 500mm racks and up to 40 racks/hour
Rush path

Hood or pass-through

For a proper service rush where loading speed and rack flow beat compactness.

  • Craven guide band: 40-60 racks/hour
  • Above that band, treat this as a Craven spec call rather than a blind basket add
Live machines matched to your result
Pulled from Craven’s public Store API, in stock, prices ex VAT.
Live from our store

Take this to Craven

Copy or print the result with your peak racks, service window, installation flags and the matched class.

Want the right one first time? Craven can check water, power, drainage, rack flow and the machine class before you buy. Call 01792 732702
This selector is an estimate from Craven guide thresholds and live product data. Final choice depends on water pressure, drainage, electrical supply, site layout and the actual ware you wash. Prices are ex VAT where shown.

Leave a Comment

Your email address will not be published. Required fields are marked *