DC SXD40 IS D Standard Extra Dishwashers – frontloading 400×400

£1,655.50

+vat

Brand:

SKU: SXD40 IS D

Product summary

Product description

Integral water softener & drain pump – 2+3 minute cycle option, superior peristaltic auto-dosing units, insulated boiler, low-water usage, double skinned, three baskets, engineer diagnostic mode. Programmable options: rinse thermolock, auto-start door, audio status indicator, integral softener (when fitted).

A 400×400 glasswasher with integral softener and drain pump—the complete hard-water, flexible-plumbing solution for venues that need spotless glass and installation freedom.

Downloads

SPECIFICATION 22 facts · tap for all External W × D × H475x540x690mmWidth475 mmDepth540 mmInput power20 ampProduct codeSXD40 IS DBrandDC

Identity3

Brand DCsite
Product code SXD40 IS Dsite
Type Commercial Glasswasherscatalogue

Size & weight5

Depth 540 mmsite
External (W×D×H) 475 × 540 × 690 mmcatalogue
External W × D × H 475x540x690mmsite
Height 690 mmsite
Width 475 mmsite

Capacity2

Supplied baskets 1 Dish, 1 Cup and Cutlerycatalogue
Wash height 290 mmcatalogue

Power & energy3

Input power 20 ampsite
Rinse element 2.6 kWcatalogue
Wash element 2 kWcatalogue

Build & fittings2

Counter balanced door Nocatalogue
Double skinned Yescatalogue

Other stated facts7

Basket size 400×400catalogue
Cycle times s 180 seccatalogue
Drain outlet height 120 mmcatalogue
Placeapacity 11catalogue
Water flow min 10 l/mincatalogue
Water per cycle 2.4 L litrescatalogue
Water pressure min 2-4 bar (28-56 psi)catalogue
THE WORKING VIEW

Why this commercial glasswasher earns its place

The SXD40 IS D is the fully equipped 400×400: softener for hard water, drain pump for awkward plumbing, and everything else you need for crystal-clear glasses and simple installation. If your venue is in a hard-water region and your waste outlet is above the machine or in an inconvenient place, this cuts through both problems at once.

The integral softener treats water before it enters the boiler and wash circuit, which means no spotting, no scale build, no chemical guesswork. The drain pump gives you layout freedom—fit the machine where it works best, not where gravity happens to point. Together, they're a complete system: you set salt cartridges to auto-swap, tell the engineer the hardness during setup, and the machine does the rest.

You get the same fast 2 or 3-minute cycles and peristaltic auto-dosing as the base model, same insulated boiler, same low-water design, three baskets, and engineer diagnostics. It's the SXD40 without compromise: no plumbing dead zones, no hard-water spotting, just reliable service after service.

BEFORE YOU BUY

Questions, answered straight

Softener: swap salt cartridges every 3–6 months (easy, two minutes). Pump: check the filter once a month and keep the outlet hose clear. Both are simpler than most kitchen kit.

No. It's simpler to install in your venue because it doesn't need a gravity fall. Standard power in, standard waste out, done. The pump is one moving part; gravity drain has zero, but the pump is reliable and spares are cheap.

Soft-water areas don't need the softener, but it doesn't hurt—it just works less. Hard water is anywhere from 200 ppm upwards. Check your local water authority's data, or ask Craven: they know by postcode. If you're borderline, the softener is cheap insurance.

The softener runs continuously, but you can bypass it if your area is soft water. It's not worth turning off just to save salt—ask Craven about bypass options during install.

Softener: just salt cartridges. Pump: check the filter monthly, hose yearly. Boiler and wash circuit: standard HACCP cleaning schedule. It's no more fussy than any 400×400 glasswasher.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC SXD40 IS D Standard Extra Dishwashers – frontloading 400×400 Product Data

Dimensions (W×D×H) 475 × 540 × 690 mm
Power supply 20 amp
Basket size 400×400
Capacity (dishes/glasses) 11
Cycle times 180 sec
Usable wash height 290 mm
Water consumption 2.4 L
Wash element 2 kW
Rinse element 2.6 kW
Double skinned Yes
Counter-balanced door No
Supplied baskets/racks 1 Dish, 1 Cup and Cutlery
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 120 mm
If you have any questions about the DC SXD40 IS D Standard Extra Dishwashers – frontloading 400×400 then please get in touch.

You may also be interested in...