DC SG35 IS D Standard Glasswashers – frontloading 350×350

£1,237.50

+vat

Brand:

SKU: SG35 IS D

Product summary

Product description

Integral water softener & drain pump – Two minute cycle, energy-saving wash pump, superior peristaltic auto-dosing units, moulded hydro-dynamic basket runners, double skinned, two glass baskets, engineer diagnostic mode. Programmable options: rinse thermolock, auto-start door, audio status indicator, integral softener (when fitted).

The DC SG35 IS D delivers restaurant-grade glassware in two minutes with built-in water softening, integral drainage, and precision chemistry dosing for hard-water venues.

Downloads

SPECIFICATION 25 facts · tap for all External W × D × H425x470x640mmWidth425 mmDepth470 mmInput power13 ampProduct codeSG35 IS DBrandDC

Identity3

Brand DCsite
Product code SG35 IS Dsite
Type Commercial Glasswasherscatalogue

Size & weight5

Depth 470 mmsite
External (W×D×H) 425 × 470 × 640 mmcatalogue
External W × D × H 425x470x640mmsite
Height 640 mmsite
Width 425 mmsite

Capacity1

Wash height 250 mmcatalogue

Power & energy4

Input power 13 ampsite
Rinse element 2.8 kWcatalogue
Totaload 3 kWcatalogue
Wash element 1.6 kWcatalogue

Build & fittings3

Counter balanced door Nocatalogue
Double skinned Yescatalogue
Filterount 2catalogue

Other stated facts9

Basket size 350×350catalogue
Boilerapacity 2.8 Lcatalogue
Cycle times s 120 seccatalogue
Drain outlet height 120 mmcatalogue
Placeapacity 14catalogue
Wash tank 10.7 Lcatalogue
Water flow min 10 l/mincatalogue
Water per cycle 2.4 L litrescatalogue
Water pressure min 2-4 bar (28-56 psi)catalogue
THE WORKING VIEW

Why this commercial glasswasher earns its place

Bars, restaurants and hotels that handle volume glassware through a fast service know the scoreline: speed matters, but so does the finish. The SG35 IS D is built for that reality. It cycles in two minutes flat—fast enough to keep pace with a busy sink station—and the peristaltic auto-dosing system lays down exactly the right amount of detergent and rinse aid every time, no guesswork, no over-dosing waste.

The integral water softener is the silent workhorse here. Hard water leaves spotting and cloudiness; soft water leaves clarity. Rather than rely on external softening, the SG35 IS D handles it built-in, so every cycle starts with the right chemistry foundation. That's especially valuable in kitchens where water hardness varies through service or where the venue's mains isn't ideally matched.

The drain pump is the third pillar—it pulls waste water away automatically, so you don't need gravity-fed drainage or rely on manual emptying. Fit it where it makes sense for your space, not where plumbing forces you.

BEFORE YOU BUY

Questions, answered straight

The SG35 IS D cycles in 2 minutes, so a single unit can wash up to 30 racks per hour. Capacity depends on your service pattern—if you're pulling used glasses continuously, load time and rest time between cycles determine actual throughput. It's a question of your own workflow; the machine itself doesn't bottleneck at that speed.

Yes—very much. Hard water leaves visible spotting and a cloudy finish, even with good detergent. The integral softener exchanges hard minerals for sodium, so rinse water is soft and spot-free. Without softening (or with external softening that fails mid-service), you'll see it on customer glassware immediately.

The footprint is 350×350 mm and it's a frontloader, so it will fit under standard counter height if you have the depth and plumbing space. The drain pump means you don't need gravity drainage—you can place it where you have electrical and water access. Measure your space and confirm with the supplier; some venues fit these in tight corners others can't.

Rinse thermolock holds temperature during the rinse cycle, so if your rinse temperature drops it won't spray cold water—critical for sanitisation compliance. Auto-start door opens the door automatically at the end of the cycle, which is handy if staff forget. Audio status indicator beeps so you know when a cycle is done. These are nice-to-haves that smooth operation; the machine runs without them.

The peristaltic auto-dosing system uses liquid detergent and liquid rinse aid—it's designed for those products and meters them precisely. Your supplier can recommend the right products for your water hardness and glass type. Dosing rates are adjustable, so you dial in exactly what you need, no waste.

The engineer diagnostic mode means that when something needs attention, you'll get clear error codes rather than guessing. The integral softener needs periodic checking (typically annual), and the dosing pumps need occasional verification. Call our service team on 01792 732702 if you need guidance or if any fault codes appear.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC SG35 IS D Standard Glasswashers – frontloading 350×350 Product Data

Dimensions (W×D×H) 425 × 470 × 640 mm
Power supply 13 amp
Basket size 350×350
Capacity (dishes/glasses) 14
Cycle times 120 sec
Usable wash height 250 mm
Wash tank capacity 10.7 L
Boiler 2.8 L
Water consumption 2.4 L
Wash element 1.6 kW
Rinse element 2.8 kW
Total load 3 kW
Double skinned Yes
Counter-balanced door No
Filters 2
Supplied baskets/racks 2
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 120 mm
If you have any questions about the DC SG35 IS D Standard Glasswashers – frontloading 350×350 then please get in touch.

You may also be interested in...