DC ED50 IS D Economy Dishwashers – frontloading 500×500

£1,655.50

+vat

Brand:

SKU: ED50 IS D

Product summary

Product description

Integral water softener & drain pump – Three minute cycle, superior peristaltic auto-dosing units, low-water usage, single skinned, two baskets, engineer diagnostic mode. Programmable options: rinse thermolock, auto-start door, audio status indicator, integral softener (when fitted).

The ED50 IS D combines built-in water softening and a drain pump in a compact 500×500 frontloader—the full spec for hard-water kitchens with awkward plumbing.

Downloads

SPECIFICATION 25 facts · tap for all External W × D × H565x635x830mmWidth565 mmDepth635 mmInput power13/30 ampProduct codeED50 IS DBrandDC

Identity3

Brand DCsite
Product code ED50 IS Dsite
Type Commercial Dishwasherscatalogue

Size & weight5

Depth 635 mmsite
External (W×D×H) 565 × 635 × 830 mmcatalogue
External W × D × H 565x635x830mmsite
Height 830 mmsite
Width 565 mmsite

Capacity2

Supplied baskets 2catalogue
Wash height 305 mmcatalogue

Power & energy4

Input power 13/30 ampsite
Rinse element 2.6 kWcatalogue
Totaload 6.4 kWcatalogue
Wash element 2 kWcatalogue

Build & fittings2

Double skinned Nocatalogue
Filterount 1catalogue

Other stated facts9

Basket size 500×500catalogue
Boilerapacity 2.8 Lcatalogue
Cycle times s 180 seccatalogue
Drain outlet height 150 mmcatalogue
Placeapacity 18catalogue
Wash tank 26 Lcatalogue
Water flow min 10 l/mincatalogue
Water per cycle 2.4 L litrescatalogue
Water pressure min 2-4 bar (28-56 psi)catalogue
THE WORKING VIEW

Why this commercial dishwasher earns its place

The ED50 IS D covers all the bases: soft water, flexible drainage, and the reliable three-minute cycle that keeps plates moving. This is the ED50 with both upgrades built in, for kitchens that need them both.

Hard water and gravity-drain limitations often come together. You're in a hard-water region (Midlands, South East, much of London), and your waste outlet is below tank level—a ground-floor kitchen, a basement dishpit, or a retrofit where space doesn't cooperate. The ED50 IS D solves both problems in one machine. The integral softener keeps your rinses spotless and your heating element scale-free. The drain pump lets you position the machine where it needs to go, not where gravity allows.

The core kit—peristaltic dosing, two 500×500 baskets, three-minute cycles, low-water usage—runs exactly as it does on every ED50 variant. The engineer diagnostic mode is there if you need to troubleshoot anything; the programmable options give you control over rinse temperature, start delays, and audio feedback.

BEFORE YOU BUY

Questions, answered straight

If you know you need both the softener and the pump, buy the IS D spec from the start—it's cheaper than retrofitting later and you get both benefits from day one. If you're unsure about water hardness, our team can test your water on 01792 732702 and advise which spec saves you money inside three years.

The softener and pump are both modest upgrades to the base ED50. Together, they're less expensive than the utility savings and redos you'd avoid. Ask for a quote; we can run the maths for your specific usage.

Both are simple, robust components. The pump is a quick swap (ten minutes, around £80–120 labour + part). The softener is even more straightforward—it's sealed inside the machine and rarely fails. The engineer diagnostic mode lets a tech read any fault without guesswork.

Yes, no problem. The softener simply runs minimally. You'll still benefit from the pump if your waste outlet is below tank level. Many kitchens run the IS D spec everywhere because the rinse quality is consistent and the drainage flexibility is worth the small extra cost.

Ring our service team on 01792 732702. They can test your water hardness, review your plumbing setup, and confirm which spec is right for your installation. If you're buying two or more machines, they can often negotiate better pricing on a site-wide install. — stage: copy tools_rail: – which-commercial-dishwasher-do-i-need – dishwasher-true-cost-calculator – commercial-refrigeration-finance-calculator – haccp-cleaning-schedule-generator
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC ED50 IS D Economy Dishwashers – frontloading 500×500 Product Data

Dimensions (W×D×H) 565 × 635 × 830 mm
Power supply 13/30 amp
Basket size 500×500
Capacity (dishes/glasses) 18
Cycle times 180 sec
Usable wash height 305 mm
Wash tank capacity 26 L
Boiler 2.8 L
Water consumption 2.4 L
Wash element 2 kW
Rinse element 2.6 kW
Total load 6.4 kW
Double skinned No
Counter-balanced door No
Filters 1
Supplied baskets/racks 2
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 150 mm
If you have any questions about the DC ED50 IS D Economy Dishwashers – frontloading 500×500 then please get in touch.

You may also be interested in...