Jantex Square Toilet Brush and Holder – White HT477

£7.12

+vat

Availability: 60 in stock

Brand:

SKU: HT477

Product summary

Pairs with Jantex 5Ltr Bin (HT475)

Product description

Add a modern touch to your washroom with the Jantex Slim Square Toilet Brush and Holder. With a round brush head featuring tough bristles, the toilet brush ensures an easy clean with minimal effort, making the job easier for your staff. Housed in a slim, white powdered-steel container, this cleaning item will fit in discreetly with your washroom decor, encouraging guests to maintain cleanliness. Complete the look by pairing this slim square toilet brush and holder with the Jantex Slim Powdered Steel White 5Ltr Bin (Code – HT475).

Modern square-shaped holder
Round bristle head allows you to get into harder to reach areas
Pairs with the Jantex slim white 5ltr washroom bin (Code – HT475)

The Jantex Toilet Brush and Holder delivers quiet, efficient bowl cleaning with tough round bristles and a slim white steel design that blends into modern washroom décor.

Downloads

SPECIFICATION 10 facts · tap for all Width120 mmHeight290 mmGross weight0.62 kgProduct codeHT477BrandJantexGTIN / EAN5.05098E+12

Identity5

Brand Jantexsite
GTIN / EAN 5.05098E+12catalogue
Product code HT477site
Seo name Jantex Square Toilet Brush and Holder Whitecatalogue
Type Toilet Brushescatalogue

Size & weight4

External (W×D×H) 290 × 120 × 120 mmcatalogue
Gross weight 0.62 kgcatalogue
Height 290 mmcatalogue
Width 120 mmsite

Build & fittings1

Colour Whitecatalogue
THE WORKING VIEW

Why this toilet brushe earns its place

A toilet brush sounds simple, but it's one of those tools that's either always in the way or nowhere to be found. This Jantex design solves both problems: the slim square holder takes up minimal floor space, so it tucks in without dominating the corner of the cubicle. The white powdered-steel finish means it doesn't look industrial — it reads as part of the décor, which encourages guests to actually use it and keep the bowl clean rather than walking past a chipped plastic eyesore.

The round brush head is the working end. Tough bristles get into the angles without shredding after a month, and the shape lets your staff clean with minimal effort — important when you've got a queue of guests waiting and housekeeping is working through a dozen cubicles an hour. The holder keeps it upright and contained, draining between uses so you're not carrying drips across a wet floor.

It's designed to pair visually with the Jantex Slim Pedal Bin (HT475), so you can kit out a whole washroom with a matching aesthetic. That level of detail — making cleaning tools look intentional rather than bolted-on — says something about the space to your guests.

BEFORE YOU BUY

Questions, answered straight

With daily use in a busy washroom, expect 4–8 weeks before bristles start to fray. The brush head can be replaced separately; check with your supplier for Jantex replacement heads. For a single-cubicle low-traffic space, one brush might last several months.

The bristles are tough synthetic fibres, designed to scrub vigorously without damaging the porcelain. They're softer than wire but stiffer than typical domestic brushes, striking the balance for daily commercial use.

Yes. The brush and holder are steel and plastic, so standard toilet cleaners, disinfectants and COSHH-approved washroom chemicals work fine. Rinse with water after cleaning and allow to drain. Don't soak the bristles in bleach for extended periods, as that will eventually wear the fibres.

Wipe the interior of the holder weekly with a damp cloth or spray it with a standard disinfectant, then dry. The slot at the bottom allows draining, so water doesn't pool. When emptying a washroom bin, you can rinse the holder's exterior with the same disinfectant.

The holder is 290 mm tall and 120 mm square, so it takes up less floor space than a standard domestic brush. It sits neatly beside a toilet or in a corner without blocking the door swing. Measure your cubicle if space is very tight, but most commercial cubicles have room.

It comes complete with the brush head installed and ready to use. When you need a replacement, order a new Jantex brush head from your catering supplier.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

Jantex Square Toilet Brush and Holder – White HT477 Product Data

Brand Jantex
Type Toilet Brushes
Dimensions 290(H) x 120(W) x 120(D)mm
Colour / Finish White
Manufacturer Ref WG6024
If you have any questions about the Jantex Square Toilet Brush and Holder – White HT477 then please get in touch.

You may also be interested in...