Why this stainless steel table earns its place
The Combisteel 800 Open Frame Worktable (1200 mm) gives you serious prep space in a stripped-back, cleanable frame. At 1200×800 mm and 900 mm high, it's the practical middle ground: large enough for high-volume prep, compact enough to fit most kitchen layouts. At 47 kg, it's still genuinely portable despite the larger surface — one person can reposition it if needed, and the open frame keeps it light.
This is the size you see in busy prep areas where speed matters. The 1200 mm length lets you lay out mise en place, plate multiple dishes, or run a continuous prep line without corner-cutting. The 800 mm depth gives enough reach without turning your kitchen into a corridorway. Stainless steel throughout, the table stands up to the daily grind: hot water, hard scrubbing, and the chemical stress of commercial sanitiser.
The open frame design is deliberate. You can see what's underneath, clean everything, and move equipment in and out without fussing. It's the choice of kitchens that have seen enough enclosed-base tables gather gunk and wondered why they bothered. At 900 mm height, it matches your other commercial prep stations, so the workflow feels consistent.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
