Why this stainless steel table earns its place
This is the tightest footprint in the Combisteel range—a robust stainless steel worktable at 800 mm wide and 600 mm deep, designed for kitchens where bench space is premium. The fixed shelf layout gives you two work levels plus the main top, tripling your functional area without expanding sideways. At 39 kg, it's substantial enough to anchor itself, light enough to move if your kitchen layout shifts.
The frame and shelves are stainless steel throughout, welded for permanence and cleaned by standard kitchen chemical. The 900 mm working height is set to commercial standard—an armpit-level work surface for prep, plating, and assembly. The shelves sit at predictable intervals, leaving headroom for hotels pans, mixing bowls, and prep containers during service. Nothing fancy. Just reliable.
Use it as your main worktable in a small kitchen, a secondary prep station in a larger one, or a build-and-plate point for takeaway operations. The narrow footprint squeezes into corners, alleys, and tight galley layouts where a larger table simply wouldn't fit.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
