Why this stainless steel table earns its place
This 1300 mm Combisteel worktable slots perfectly into smaller kitchens, galley-style prep areas, or as a dedicated station within a larger kitchen suite. At 700 mm deep, it gives you a proper working surface without sprawling too far into the walkway—a genuinely useful size that doesn't waste space either. The solid stainless steel construction is built to absorb daily punishment: scrubbing, knife cuts, thermal shock, constant wet cleaning.
The bottom shelf is where this table earns its place. It's not decorative—it's practical storage for sheet pans, mixing bowls, and the everyday kit you need in arm's reach. When space is at a premium, that undercounter capacity makes the difference between a cluttered counter and an organised prep area. And because the whole frame is stainless steel, you can clean underneath without wrestling with difficult corners or worrying about rust.
At 53 kg, it's substantial without being impossible to move if your layout ever changes. The 900 mm work height is standard across professional kitchens—comfortable for standing prep work through a service. This is kit that gets out of your way and lasts, which is exactly what busy kitchens need.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
