Why this stainless steel tables with upstand earns its place
The Combisteel 700 with upstand is a workhorse for kitchens that run at scale. At 1600mm wide and 700mm deep, you've got a serious production bench. The open frame design means no trapped water, no hidden dirt—spray it down and you're done. The stainless steel 430 construction handles the daily punishment: blood, salt, acidic cleaners, high-pressure hosing. It won't pit, won't stain, won't give you surprises when health inspectors visit.
The upstand (rear splashback) is the difference between a basic table and a properly engineered kitchen station. It stops water and spillage running down the back wall onto the floor—critical in kitchens where slip hazards put people at risk. It also serves as a mounting point if you want to add additional shelving or equipment later. The open frame below means you can hose underneath without disassembly—no grease buildup, no bacterial colonies hiding where you can't reach.
At 700mm depth you've got working room without the table eating up too much floor space. This is the depth catering kitchens, food producers, and butchers choose when they need both capacity and walkability. Assembly is straightforward and, at 60 kg, it's a two-person job to position. The flat-pack format means easy transport if you're refitting a kitchen or opening a new site.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
