Why this stainless steel tables with upstand earns its place
The 7490.008 is a flat-packed stainless steel worktable with a bottom shelf and upstand for commercial kitchen furniture layouts. It appears under stainless steel tables with upstand, so it should be assessed as part of the prep run, not as an isolated purchase.
Use it where staff need a defined work surface, lower holding space and a wall-side table position. Keep dimensions, handling weight and shelf-loading checks in the specification review before they drive a layout decision.
Before ordering, ask Craven Cooling to check the footprint, access route, assembly requirements and levelling approach. If the table is going beside sinks, cupboards or cooking equipment, confirm the surrounding clearances as part of the same check.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
