Why this stainless steel tables with upstand earns its place
The Combisteel 600 Worktable at 2000 mm is a proper production table. Two metres of 430 stainless steel at standard height (850 mm), deep enough for real prep work (600 mm), with a raised back edge to contain splashes and keep the workspace tidy. This is the table for restaurants running multiple covers, for butchers hanging and dressing, for catering operations prepping meals in volume, or for any kitchen where two people can stand at one table and both work without getting in each other's way.
The open frame construction means nothing gets trapped underneath. You can clean the whole thing head to toe without moving it — spray it down, squeegee the water, dry it properly. Stainless steel 430 is food-safe, corrosion-resistant, and cleans to better than new if you're using a degreaser. At 75 kg it's solid enough to feel stable under load — stacks of trays, hot pans, prep containers — but still moveable if you need to reorganise the kitchen or do a deep clean of the floor.
The flat-pack design means it doesn't need specialist delivery or on-site assembly teams. Build it yourself in minutes, position it where it belongs, and start working. For kitchens doing the volume that justifies a two-metre table, this is a no-nonsense choice.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
