Why this stainless steel cupboards with upstand earns its place
This is a worktable for kitchens where every centimetre counts but you need real storage and splash protection. At 1400 mm wide and 700 mm deep, it's a step down from the full 2-metre table — same height, same storage cupboard, same sliding doors, but narrower footprint. The upstand is the difference: a lip around the edge that keeps water, prep scraps, and splashes contained on the work surface. In a busy kitchen, that detail saves cleanup time and keeps surrounding storage dry.
The whole unit is stainless steel 430, solid enough at 80 kg to handle real prep work without flex or wobble. The cupboard underneath runs the full width, so you've got generous storage for sheet pans, mise en place, or equipment. The sliding doors mean you're not wrestling with swing-out hinges in a tight aisle.
The upstand makes this unit a better fit for certain work — wet prep, dressing, portioning, anything splashy. You're not mopping around the table between services. The 1400 mm width is enough space to work without taking up the room of a full-width station, making it perfect for secondary prep areas or specialized tasks.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
