Why this stainless steel cupboards with upstand earns its place
The Combisteel 7452.3075 is a stainless steel worktable cupboard with sliding doors and an upstand. It suits commercial kitchens that need a practical prep surface with cupboard storage below, without adding a separate storage unit.
The sliding doors keep access contained at the front of the cupboard, which is helpful in tighter work areas. The upstand gives the rear edge of the worktop a raised finish for wall-side stainless steel layouts.
Use it where utensils, containers or service items need to sit close to the preparation task. For final positioning, check the live specification card and make sure the unit fits cleanly with any adjoining tables, sinks or cupboards.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
