Why this stainless steel cupboards with upstand earns its place
This Combisteel worktable gives you maximum linear working space in a shallow footprint. At 2000 mm long, 600 mm deep, and 850 mm high, it's the table that works in galley kitchens, alongside walls, and in tightly planned operations where depth is a luxury you don't have. Two people can work side by side without collision, and the 600 mm depth is sufficient for plating, finishing, assembly and service work—every kitchen task except the deepest prep tasks.
The full-length upstand is the critical detail. It runs the entire 2000 mm, containing spills and splash, protecting the wall from steam and damage, and preventing ingredients from sliding off during high-pressure service. The cupboard below provides genuine storage across the full length, so your equipment, trays and smallwares are accessible but out of sight.
Stainless steel 430 is built for kitchens. It cleans easily, resists splashes and the daily assault of service conditions, and improves with age. At 103 kg, it's substantial and solid—no flex across the 2000 mm length, no wobble when you're working hard. This is the kind of table you build a kitchen around: reliable, hygienic, and genuinely fit for purpose.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
