Why this single bowl sink earns its place
The KWC DVS single sink is the work sink you can build into any kitchen—1200mm wide, wide enough to be useful but compact enough to fit where a double won't. The 250mm deep bowl in fully pressed 304 stainless steel handles serious work: soaking stockpots, washing down prep surfaces, rinsing greens. The satin polish finish resists marking and cleans to gleaming in seconds.
The inclined drainers do a job. They're angled to shed water back into the bowl instead of pooling on the work surface, so your prep area stays dry and safe. The right-hand drainboard is generous—room to stack cleaned pans, rest vegetables as you prep them, or stage items for service. Every aspect of the design assumes you're working hard.
It comes complete: stand, undershelf, taps and waste fittings included. Delivered flat-packed, it assembles in under an hour without any welding or plumbing skills beyond basic hand tools. At 900mm working height, it sits at perfect arm level. At 13 kg, two people position it easily. For a small kitchen, a catering setup, a butcher shop or anywhere prep and cleaning need to happen in the same footprint, this is the sink that earns its place.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
