CombiSteel Retractable Hose Reel 6 M with Spray Gun 7212.0045

£751.00

+vat

SKU: 7212.0045

Product summary

Size W/D/H (mm) x x

Product description

G ½ inlet with internal thread

Retractable hose reel with 6-metre reach and spray gun, engineered for compact sink stations where space is tight but rinsing range matters.

Downloads

SPECIFICATION 8 facts · tap for all Width80 mmGross / net weight12 kgBrandCombiSteelGTIN / EAN7435137857877TypeCommercial Sink TapsAccessoriesG ½ inlet with internal thread

Identity3

Brand CombiSteelcatalogue
GTIN / EAN 7435137857877catalogue
Type Commercial Sink Tapscatalogue

Size & weight4

Depth 380 mmsite
External (W×D×H) 80 × 380 × 380 mmcatalogue
Gross / net weight 12 kgsite
Width 80 mmsite

Build & fittings1

Accessories G ½ inlet with internal threadcatalogue
THE WORKING VIEW

Why this commercial sink tap earns its place

Six metres is the practical sweet spot for smaller kitchens and tightly configured sink stations. It gives you enough reach to rinse pots positioned back from the edge and spray prep surfaces without mounting the reel so far from your work that you're constantly stretching. At 80 × 380 × 380 mm and 12 kg, it takes up minimal wall real estate while staying grounded under regular use.

The spray gun integrated into the reel means you're not managing separate attachments or hunting for a hose end. It's built as one system, tested and balanced for the 6-metre hose length — you pull it out and it works with consistent pressure and spray pattern, then retracts without tangling or kinking.

This is the reel for kitchens where every centimetre of wall space is allocated. You still get the reliability and reach of a proper retractable system, just calibrated for tighter quarters. The shorter hose means lighter pull resistance and faster retraction, which adds up over hundreds of daily cycles in a working kitchen.

BEFORE YOU BUY

Questions, answered straight

Think about your sink layout. If your pots sit close to the sink edge and surfaces are nearby, 6 metres is enough. If you're rinsing surfaces further back, have large prep areas, or like working at different distances, 10 metres gives you flexibility. Most kitchens prefer 10m when wall space isn't critical — extra reach is rarely a problem.

Both spray guns are designed for commercial use and deliver similar pressure and patterns, but they're calibrated to their respective hose lengths for consistent performance. The 6-metre gun is optimized for its shorter reach.

The housing is 80 × 380 mm face area. When fully extended with the 6-metre hose out, the gun hangs 6 metres away from the reel — you need clear space in that direction. Check your layout before ordering: if your sink is in a corner with limited forward space, you might need the 10m or a fixed pre-rinse unit instead.

Yes, if the frame is solid enough to take the load and vibration. Commercial stainless sink units are typically built to accept wall-mounted equipment. Mounting on the frame itself saves installing separate wall backing. Confirm with your installer that the frame can handle the 12 kg load plus the dynamic force of pulling the reel.

Yes. Shorter hose actually has lower stress — less weight, less movement, less thermal variation. If anything, the 6-metre setup may see slightly longer hose life because it's not being pulled as far. Regular maintenance — rinsing the hose, inspecting for damage — matters more than the length.

Yes. When the hose eventually needs replacing, we stock spares. Replacement is straightforward — unwind the old hose, wind on the new one. It's one of the few maintenance tasks your team can handle without calling a technician.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

CombiSteel Retractable Hose Reel 6 M with Spray Gun 7212.0045 Product Data

Brand CombiSteel
Dimensions (W×D×H) 80 × 380 × 380 mm
Weight 12 kg
If you have any questions about the CombiSteel Retractable Hose Reel 6 M with Spray Gun 7212.0045 then please get in touch.

You may also be interested in...