Why this kitchen canopie earns its place
The GJ632-LV is Lincat's Smart Vent System sized for a 2000mm run of cookline. It's a stainless steel canopy — 2000mm wide, 1200mm deep, 740mm high — finished in silver, built to sit over a working bank of equipment and pull heat, steam and grease-laden air away from it.
The point of the Smart Vent System is what it replaces. A fully bespoke ventilation system means a canopy designed and fabricated to fit one kitchen, with the time and cost that carries. This is Lincat's ready-engineered answer: the same extraction job, done by a canopy that's already built rather than one still on the drawing board — a genuinely cost-effective alternative to going fully bespoke.
It's also built to last where it counts. At 101kg gross, this is a solid piece of stainless steel engineering rather than a lightweight shell, sized to sit above heat-producing equipment continuously. That's backed by 2 years parts & labour warranty as standard, with the same cover available as an extended warranty — so the saving on install doesn't turn into a cost down the line.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
