Why this free standing fryer earns its place
The DM541-P is the propane gas version of Lincat's Opus 800 free standing filtration fryer, built for busy commercial kitchens that need volume and controlled oil management. It measures 1070 x 400 x 800 mm, weighs 99.2 kg and is finished in stainless steel.
It holds 16 litres, uses two baskets and is rated at 51 kg/hr output. The manufacturer describes it as highly economic, with 97% energy efficiency, lower running costs and metallic-alloy mesh pre-mix gas burner technology.
Pumped filtration, residual heat recovery, fuzzy logic electronic temperature control, removable batter plates, electronic ignition and a wide bore pipe are all part of the design. The result is a fryer that is set up to keep working through service rather than turning oil handling into a separate chore.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
