DC PG50 IS D Premium Glasswashers – frontloading 500×500

£2,222.00

+vat

Brand:

SKU: PG50 IS D

Product summary

Product description

Integral water softener & drain pump – Two minute cycle, heavy-duty wash pump, low-volume wash tank, superior peristaltic auto-dosing units, insulated cabinet and door, insulated boiler, double skinned, extra usable wash height, two glass baskets, engineer diagnostic mode. Programmable options: rinse thermolock, auto-start door, audio status indicator, integral softener (when fitted).

The DC PG50 IS D is the fully-specified glasswasher: integral water softener for spot-free results in hard water, drain pump for installation flexibility, and a two-minute cycle built for busy service.

Downloads

SPECIFICATION 24 facts · tap for all External W × D × H605x635x840mmWidth605 mmDepth635 mmInput power30 ampProduct codePG50 IS DBrandDC

Identity3

Brand DCsite
Product code PG50 IS Dsite
Type Commercial Dishwasherscatalogue

Size & weight5

Depth 635 mmsite
External (W×D×H) 605 × 635 × 840 mmcatalogue
External W × D × H 605x635x840mmsite
Height 840 mmsite
Width 605 mmsite

Capacity1

Wash height 345 mmcatalogue

Power & energy4

Input power 30 ampsite
Rinse element 4.5 kWcatalogue
Totaload 6.55 kWcatalogue
Wash element 2 kWcatalogue

Build & fittings2

Double skinned Yescatalogue
Filterount 2catalogue

Other stated facts9

Basket size 500×500catalogue
Boilerapacity 5 Lcatalogue
Cycle times s 60 90 120 180 User Definedcatalogue
Drain outlet height 80 mmcatalogue
Placeapacity 30catalogue
Wash tank 12 Lcatalogue
Water flow min 10 l/mincatalogue
Water per cycle 2.6 L litrescatalogue
Water pressure min 2-4 bar (28-56 psi)catalogue
THE WORKING VIEW

Why this commercial dishwasher earns its place

Sometimes you need everything. Hard water in your location, no natural drainage fall to the sump, and tight kitchen space that demands a machine you can place anywhere. The PG50 IS D runs the PG50's proven core—two-minute cycle, heavy-duty wash pump, precise peristaltic auto-dosing—and adds the two features that solve the toughest installation and water-quality challenges.

The integral water softener removes hardness from the mains, so every rinse produces spot-free glasses. No external resin cartridges, no staff hassle—the softener works silently in the background, and your service engineer handles resin renewal during scheduled maintenance. Hard-water spotting and scale on the boiler become non-issues. That precision in water chemistry combines with the peristaltic dosing to mean you actually use less detergent and rinse aid.

The integral drain pump means you're not constrained by gravity. If your kitchen layout doesn't give you a natural downslope to the sump, the pump actively pushes wastewater up to a raised outlet or across to wherever your drain runs. Installation becomes a matter of where service flow works best, not where gravity permits.

BEFORE YOU BUY

Questions, answered straight

Not necessarily. If your water is soft naturally and you have gravity fall to the sump, the standard PG50 is enough. But if either hard water or drainage constraints apply to you, solving just one leaves you with spotty glasses or an expensive plumbing retrofit. The IS D spec is for venues where both matter; pick the IS or D alone if only one applies to your site.

The softener and pump are both labour-saving features that solve installation and running-cost problems—better to invest upfront than discover spotting or drainage issues later. Talk to sales on 01792 732702 for pricing and see if the payback calculator shows the savings in labour and chemical costs over a few years.

The softener handles up to around 35°dH, covering most of the UK. The pump lifts water about 2 metres above the machine outlet. Your installer can confirm both suit your site. Call 01792 732702 if you're unsure about hardness or drainage height—they can advise on any pre-treatment or additional plumbing needed.

The engineer diagnostic mode logs faults. The softener resin life is typically 12 to 18 months depending on hardness and use; your annual service call catches that before it becomes an issue. If the pump can't clear a blockage, it alerts and your engineer responds. Regular maintenance prevents most problems—call 01792 732702 to arrange annual service.

Resin renewal is a straightforward task handled during your annual service visit—about 20 minutes. It's not a staff responsibility; your service engineer manages it. That's why the integral softener is labour-saving compared to external cartridge systems.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

DC PG50 IS D Premium Glasswashers – frontloading 500×500 Product Data

Dimensions (W×D×H) 605 × 635 × 840 mm
Power supply 30 amp
Basket size 500×500
Capacity (dishes/glasses) 30
Cycle times 60 90 120 180 User Defined
Usable wash height 345 mm
Wash tank capacity 12 L
Boiler 5 L
Water consumption 2.6 L
Wash element 2 kW
Rinse element 4.5 kW
Total load 6.55 kW
Double skinned Yes
Counter-balanced door Yes
Filters 2
Supplied baskets/racks 2
Min. flow rate 10 l/min
Min. water pressure 2-4 bar (28-56 psi)
Drain outlet height 80 mm
If you have any questions about the DC PG50 IS D Premium Glasswashers – frontloading 500×500 then please get in touch.

You may also be interested in...