Why this dryer earns its place
The Maytag JA321 (model MDE20MNTGW) is a top-loading vented tumble dryer built around a 10.5kg capacity, rated at 4.6kW on a 240V single-phase supply — figures that matter directly for electrical planning before installation rather than after.
An extra-large door opening is built into the top-loading design for easier positioning and loading, and a four-roller suspension system paired with permanently lubricated bearings is specified for smooth, reliable operation under repeated daily cycling rather than occasional use.
The Turbovent system is designed to accommodate long or complicated venting setups, which matters where the dryer cannot sit against an external wall. The porcelain enamel top with full-wrap console is built to withstand the wear a commercial laundry room puts on a machine.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.



Electrolux myPRO Commercial Washing Mach£—
Electrolux myPRO Commercial Tumble Dryer£—
Electrolux myPROXL 12KG Washing Machine £—
Electrolux myPROXL 12KG Vented Dryer TE1£—
Miele Commercial Evolution Washing Machi£—
Miele Commercial Washing Machine White 7£—
Miele Commercial Washing Machine White 7£—
Miele Commercial Washing Machine White 8£—
Miele Commercial Washing Machine White 7£—
Miele Commercial Washing Machine Stainle£—
Miele Commercial Washing Machine White 8£—
Miele Commercial Washing Machine Stainle£—
Miele Commercial Mop Star 60 Washing Mac£—
Miele Commercial Map Star 80 Washing Mac£—
Miele Commercial Vented Dryer 8kg Stainl£—
Miele Semi-Commercial SmartBiz Heat Pump£—
Maytag Commercial Toploading Vented Tumb£—
PLAN THE ROOM
SPREAD THE COST
YOUR SCHEDULE