Why this stainless steel worktop earns its place
The Combisteel 800 SS Flat Worktop (2500 mm) is the workhorse — a full-length run for kitchens that need real estate. At 2500 mm wide and 800 mm deep, it spans an entire prep wall, accommodates multiple stations, and keeps your whole team coordinated on one surface.
Built from 430 stainless steel, 0.8 mm thick, with waterproof melamine backing and welded corners — the same proven construction as the smaller models, just extended. The reinforcement matters at this length. A long surface without proper bracing would sag, flex, and eventually fail. This one stays flat under load, whether you're running a service or a prep-heavy dinner service.
At 54 kg, it's a two-person fit on the cupboards. Once it's down, it becomes the backbone of your kitchen layout — the reference point where the real work happens.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
