Why this stainless steel table earns its place
Corner space is wasted space in most kitchens—hard to reach, awkward to work against, dead real estate. This 900 mm corner table changes that. By running 900 mm deep on one arm and 700 mm on the other, it tucks into a corner and gives you two working edges from one footprint. No overhang to catch your hip, no deep shelf you can't reach to the back of.
At 31 kg, it's substantial enough for the daily assault of prep work—vegetable washing, plating, ingredient assembly—without moving or rocking. The stainless finish cleans fast (no staining, no smell retention) and the flat-pack design means it ships tight and bolts together in about 20 minutes. For cafés, restaurants, catering prep areas, and kitchen fit-outs where every centimetre counts, this table pays for itself in usable space.
The straightforward design is intentional: no shelves to get in your way, no features that don't contribute. It's a worktable, and it works.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
