Why this stainless steel table earns its place
At 1600 mm wide, this Combisteel table hits the practical sweet spot — big enough to work with without eating your entire kitchen footprint. It's the surface where you do real work: breaking down ingredients, portioning, plating, prep for service. The stainless steel construction and integral bottom shelf work together to create an organised prep zone that feels both spacious and contained.
The 600 mm depth gives you a comfortable working margin, so you're not constantly reaching or squeezing around the edges. The bottom shelf is right there, keeping utensils, containers, and prepped ingredients within arm's reach without cluttering the work surface itself. At the standard 900 mm height, it sits perfectly with the rest of your kitchen equipment, so prep work flows naturally from one station to the next.
Stainless steel washes clean between tasks and can be sanitised in seconds. The 59 kg weight means the table sits stable under working loads — you won't get movement or flex while you're working hard. This is a table designed for the pace of a working kitchen: busy enough that you need proper workspace, but sized to fit without requiring a whole kitchen redesign.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
