Why this stainless steel table earns its place
Not every kitchen is wide — some are long but narrow, with limited side-to-side space. This table solves that problem. At 1200 mm wide but only 600 mm deep, it gives you a proper work surface for prep, plating or assembly without demanding a huge footprint. It slides neatly into galley kitchens, alongside existing equipment, or along an edge of a smaller prep room.
The 600 mm depth is smaller than a standard 800 mm table, but it's not cramped. You get enough space for a chopping board, mise en place containers, and the active work itself — the depth trades off for the width you've gained. Everything you need is within arm's reach, nothing sits beyond your reach.
At 47 kg, a single person can reposition it if needed, making it ideal for kitchens that rearrange their layout or for caterers who work across multiple venues. The two shelves follow the same reliable stainless steel construction you'd find in any commercial table: welded, level, hard-wearing, and straightforward to clean.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
