Why this wall table earns its place
The Vogue Stainless Steel Prep Table with Upstand combines three advantages in one unit: a solid 1500 × 600 mm work surface, an integrated upstand that keeps items from falling behind, and castors that let you move it between stations without wrestling a dead weight.
Built from 430 stainless steel with polished finish, it's the same material and care level you'd expect from prep equipment that sees daily service. The 1500 mm length is ideal for single-chef or two-person prep — smaller than the 1800 mm models but still spacious enough for proper technique. The upstand runs the length of the table, preventing utensils, trays and small containers disappearing into the gap. The undershelf gives you storage for dry goods, spare containers or backup equipment.
The castors are the practical difference from fixed-base models. You can roll this table into position during setup, reposition it if service demands change, and move it aside for deep cleaning or layout shifts. The 960 mm height is standard for commercial work — comfortable knife work and reach without strain. At 39.64 kg when empty, it's heavy enough to feel stable under load but light enough that two people can manage it when needed.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
