Why this stainless steel tables with upstand earns its place
The Combisteel 600 Worktable with upstand is a clean, honest piece of kitchen furniture. One thousand two hundred millimetres of solid 430 stainless steel at standard working height (850 mm), with a raised back edge to contain splashes and drippage. The open frame means access underneath — easy to clean around, easy to position, easy to move when the kitchen layout shifts.
Stainless steel 430 is food-safe, resists corrosion in a wet environment, and cleans to better than new if you actually use a degreaser. The upstand is the detail that makes this piece work in prep areas, dishwash stations and finishing zones where liquid is part of the job. You won't push food or water straight off the edge. You won't lean against a table and drip onto your shoes.
At 45 kg it's heavy enough to feel stable under load, light enough that two people can reposition it if a deep clean needs clearing the floor. The flat-pack format means it ships efficiently and assembles in minutes with basic tools — no specialist delivery, no sitting in a warehouse waiting for fitters.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
