Why this stainless steel cupboard earns its place
When a full 2-metre prep cupboard won't fit your layout, the 1800 mm version gives you the same build quality and sliding-door ease in a more compact footprint. You're not compromising on what matters: 700 mm depth for proper storage, 850 mm work-height to integrate with your existing bench run, and right-positioned drawers for efficient access.
Stainless steel 430 throughout means this unit handles the same daily heat, humidity and sanitizing spray-downs as larger commercial kitchens—just in a size that fits smaller spaces. At 102 kg, it's still substantial enough to stay stable during service but manageable to position during install. The sliding doors open straight back into the unit, so there's no swing obstruction in a cramped galley or corner setup.
The 1800 mm width is the sweet spot for many prep operations: enough room for a cutting board, prep containers and utensil drawers, but not so wide that it dominates a small kitchen. Pair it with a chopping table on one side and a reach-in cooler on the other, and you've got a coordinated prep station that actually fits the space.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
