CombiSteel Stainless Steel Wall Shelf 300x1000mm incl. Brackets 7490.0150

£53.90

+vat

- +

SKU: 7490.015

Product summary

Size W/D/H (mm) 1000 x 300 x 190

Product description

Stainless steel 430 wall shelf at 1,000 mm wide × 300 mm deep, with brackets included, for reliable storage across a standard prep line or counter run.

Downloads

SPECIFICATION 10 facts · tap for all Width1000 mmDepth300 mmHeight190 mmGross / net weight1 kgBrandCombiSteelGTIN / EAN7435137819875

Identity3

Brand CombiSteelcatalogue
GTIN / EAN 7435137819875catalogue
Type Commercial Kitchen Shelvingcatalogue

Size & weight5

Depth 300 mmsite
External (W×D×H) 1000 × 300 × 190 mmcatalogue
Gross / net weight 1 kgsite
Height 190 mmsite
Width 1000 mmsite

Build & fittings2

Exterior finish Stainless steel 430site
Max load per shelf 30site
THE WORKING VIEW

Why this commercial kitchen shelving earns its place

At 1,000 mm wide and 300 mm deep, this shelf spans a good working width without dominating your wall. It's the middle ground between smaller targeted storage and full-length runs—enough to serve a prep station, a sink line, or an ingredient staging area. The 190 mm height sits just above your working level, close enough to grab regularly used items without reaching or stooping. Stainless steel 430 shrugs off daily washing, steam, and the corrosive environment of a working kitchen.

Brackets come included, ready to install. At 1 kg, it's light to handle and rigid across its span. This is the workhorse width for commercial kitchens that balance storage volume with smart wall use—holding bottles, jars, trays, and equipment where you need them, without consuming precious floor space.

Whether you're fitting out a butcher's prep room, equipping a food production kitchen, or stocking a busy catering operation, this shelf delivers straightforward, durable storage that survives daily use and deep cleans without fuss.

BEFORE YOU BUY

Questions, answered straight

It's the sweet spot—wide enough to serve a standard prep station or counter run, narrow enough that you can install multiple runs at different heights without them feeling overwhelming. It's a familiar width in commercial kitchens.

It doesn't. Stainless steel 430 is rigid; the shelf maintains level across its entire span even under regular kitchen loads. Mount it to studs if possible, or use appropriate anchors for your wall type—either way, it stays put.

Yes. Space them 300–400 mm apart (depth plus clearance) so you can actually reach items on the lower shelf. All brackets are stainless steel, so they won't corrode or cause issues—just check your wall fixings handle the combined load.

Width. 1,000 mm is the practical limit for most single installations; 1,600 mm spans a longer wall run. Everything else—depth, height, material, load capacity—is the same. Choose by the space you're filling.

Yes. The shelf is flat, brackets are simple stainless steel, no hidden grooves. Wipe it down with hot water and sanitiser during your shift break—takes seconds. The smooth surface resists bacterial growth.

Unbolt the brackets and it comes away cleanly. No permanent damage to a properly prepared wall. Stainless steel doesn't leave stains or marks that won't wash off.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

CombiSteel Stainless Steel Wall Shelf 300x1000mm incl. Brackets 7490.0150 Product Data

Brand CombiSteel
Dimensions (W×D×H) 1000 × 300 × 190 mm
Material Stainless steel 430
Weight 1 kg
If you have any questions about the CombiSteel Stainless Steel Wall Shelf 300x1000mm incl. Brackets 7490.0150 then please get in touch.

You may also be interested in...