Why this racking trolley earns its place
The Cambro GN 1/1 Trolley extends what Cambro learned with their 2/1 model: composite material that outperforms steel and aluminium in real kitchens. At 1707 mm tall, it holds standard full-size 1/1 Gastronorm pans on widely spaced rails, making it the choice for kitchens handling larger batch volumes or full-pan rotation between prep stations. The slim profile — just 730 mm deep and 438 mm wide — fits through doorways and works in compact kitchens without dominating the space.
Composite construction eliminates the weak points of metal trolleys. There's no rust, no weld failure, no metal fatigue from hundreds of load cycles. The 7.6 cm rail spacing is wide and versatile — it accommodates the full range of gastronorm pan depths without shimming or adjustment. The 3 mm pan stops at each rail end keep pans locked in place during movement; it's a small detail that prevents costly accidents and pan spillage on service floors.
At 60 kg loaded weight, the trolley is substantial but manageable for two people moving it between stations or into storage. The castors roll smoothly without noise — no metal-on-metal rattle that echoes through service areas. Cambro's modular design means a damaged shelf or rail is replaced, not the entire trolley, keeping downtime short and repair costs reasonable.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
