Why this free standing fryer earns its place
The Lincat Opus 800 Free Standing Natural Gas Filtration Fryer OG8111/OP DM539-N is built for commercial kitchens that need steady output and a practical filtration system. It is a natural gas model with a 230V supply, a 2000W rated input, two baskets and two tanks.
Its stainless-steel build and silver finish suit a hard-working kitchen, while the listed size of 1070 x 600 x 800 mm and gross weight of 138 kg give you a clear picture of the footprint. This is a free-standing fryer with enough presence to sit properly in a service line.
The fryer has a 28L capacity and is rated at 64kg/hr, with a temperature range from +90 to +190 °C. Lincat says pumped filtration can have the fryer ready to fry again in under 5 minutes, and that oil can be filtered during or after service, even whilst hot.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
