Why this free standing fryer earns its place
The Lincat Opus 800 Free Standing Natural Gas Filtration Fryer OG8110/OP DM537-N is built for busy commercial kitchens that want a compact fryer with filtration built in. Its single 14 litre tank and one basket keep the format focused, while the pumped filtration system is there to reduce the stop-start feel of service.
The manufacturer says the oil can be filtered and the fryer ready to fry again in under 5 minutes, even during or after service and even whilst hot. That gives the operator a practical way to keep oil working and avoid unnecessary downtime.
Stainless steel construction, a silver finish and a 300 mm width make it a straightforward fit for a dedicated frying station. The fryer measures 1070 x 300 x 815 mm, weighs 84 kg, runs on natural gas, is listed at 230V with a 16000 W rated input, covers +90 to +190 °C and comes with a 2 years parts and labour warranty.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
