Why this free standing fryer earns its place
Built for the daily rigours of a busy commercial kitchen, this Lincat Opus 800 fryer combines a heavy-duty stainless steel body with a 25 litre single tank and two baskets. It is a free standing natural gas model with a 600 mm width, 800 mm depth and 1070 mm height, giving you a full-service fryer in a practical footprint.
The pumped filtration system is the standout feature. Lincat says the oil can be filtered and the fryer ready to fry again in under 5 minutes, and that filtration can happen during or after service, even while the oil is hot. That helps protect oil life without slowing the kitchen down.
It runs at 230V with a 30,000 W rated input and works from +90 to +190 °C. With a stainless steel finish, 122 kg gross weight and a 2 year parts and labour warranty, this is a fryer built for repeated service rather than occasional use.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
