Why this free standing fryer earns its place
Valentine's Evo range is built around a practical idea: a fry tank pressed from a single piece of stainless steel, with a smooth rounded profile that is easier to keep clean than a busy, awkwardly formed pan. The 600P follows that logic closely, giving you a freestanding fryer made for hard daily use.
This model sits on a 900 × 600 × 600 mm frame and weighs 89 kg, so it has the presence of a proper floor-standing fryer without sprawling across the line. The stainless-steel body and silver finish suit a commercial kitchen, and the 3 year on-site parts and labour warranty adds welcome cover.
Capacity is set at 25-28 litres, with two baskets and one tank. The small cool zone is there to help reduce the oil needed to fill the fryer, which is a practical benefit both in running cost and in day-to-day handling. The temperature range runs from +30 to +190 °C, and the listed rated input is 22,500 W.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
