Why this free standing fryer earns its place
The FriFri Touch 422 at 15 kW is built for high-volume kitchens where your power feed is constrained but your frying demand isn't. Dual 15-litre tanks, same stainless steel construction, same touchscreen control. The difference is the electrical draw: 15,000 W instead of 22 kW means you can spec it without upgrading your main supply—a real saving if your building's already at capacity.
Service flow stays the same. Twenty-four programmed recipes on the 4.3" QPad touchscreen, icon-driven for line speed. Adaptive cooking adjusts times based on batch weight. The ColourCue traffic-light system keeps everyone informed: green is ready, red is attention-needed, amber is pre-heating. Two baskets per tank let you run independent products or link both tanks for single-item volume runs.
Oil management is identical: onboard Oil Assistant tracks quality and tells you when to filter. The optional xFri system cuts that to under five minutes, no shutdown. The hinged tank and radiused corners stay—cleaning remains straightforward. Real energy tracking is built in across 8 hours, 24 hours, 7 days, and 28 days, so you see exactly where power is going.
Check the narrowest clear opening, then every corner, landing, step and lift from the kerb to the room.
Stated machine geometry while kept upright. Allow handling room and confirm the complete route.
Measure the clear opening
Enter the usable gap with the door fully open.
This checks straight stated geometry only.
