Why this negative monoblock earns its place
The 7480.0060 is the refrigeration engine for a negative walk-in — a freezer cold room. It's a split unit, meaning the condensing side and the in-room evaporator are separate rather than built into one through-wall block, which gives you freedom over where the heat-rejecting half sits. It's rated to run a freezer room with an internal volume in the 10.88 to 21.1 m³ range.
As a negative unit it holds a walk-in at frozen storage temperature; the exact operating temperature band and electrical figures are on the spec table on this page. Because it's a split, the condensing unit can be sited away from the room — outside, on a roof or in a plant space — while the evaporator does the cooling inside, keeping unwanted heat and noise out of the walk-in itself.
This is a fitted system, not a plug-in appliance. Confirm the electrical supply figures in the spec table on this page against your site before ordering, and note that it needs interconnecting pipework and electrical work between the condensing and evaporator sections plus condensate drainage. Have it installed and commissioned by a qualified refrigeration engineer — Craven Cooling can advise on siting and specification before you order.
