Williams R70SCD Multideck with Hinged Door – Stainless Steel – HEH162

£4,168.21

+vat

Brand:

SKU: Lockhart-HEH162

Downloads

SPECIFICATION 6 facts · tap for all MaterialPolished Stainless SteelProduct codeHEH162BrandWilliamsRange / seriesGemTypeMultideck

Identity4

Brand Williamscatalogue
Product code HEH162site
Range / series Gemcatalogue
Type Multideckcatalogue

Build & fittings2

Colour Stainless Steelcatalogue
Material Polished Stainless Steelcatalogue
THE WORKING VIEW

Why this multideck earns its place

A multideck is the workhorse of fast-moving chilled retail — it shows stock on three or four shelves under bright lighting and holds products at selling temperature. The R70 is the ultra-compact size in the Gem range and suits tight butcher counters, corner shops, and small delicatessens where space is at an absolute premium. The hinged-door design matters: air curtains on open models run continuously and cost 2–3 pence per day just to hold temperature, but this cabinet seals when customers step back, cutting that loss significantly. Stainless steel is standard for butchers and deli service counters; it resists salt-cured products and daily wipe-downs and fits seamlessly into a professional kitchen or counter area.

The Gem multideck runs at just +2 to +10 °C and three shelves hold a steady supply of cold cuts, salads, or ready meals in the tightest shopfits. Night blind (if ordered) seals the front completely after service, halting temperature drift overnight. At 700 mm, this cabinet fits anywhere and pays for itself through energy savings within 18–24 months against an open-front equivalent.

BEFORE YOU BUY

Questions, answered straight

Open-front models run an air curtain continuously (typically 150–200 W); hinged doors cut that to under 50 W when closed. On a seven-day week, that's roughly £15–20 per cabinet per year — the payback depends on local electricity cost.

No. The R70 holds +2 to +10 °C and modern glass has low-emissivity coating; condensation is rare. If stock is wet on arrival, pat it dry before shelving.

Yes, within 2–3 mm across the width. Unlevel installation causes door sag and gasket wear. Most retailers call a refrigeration specialist for installation; Craven Cooling can arrange this on 01792

The R70 is 700 mm wide and the smallest in the range. Standard shopfront doorway height is 2100 mm; check your space before ordering. The cabinet ships as one unit and does not disassemble.

Yes. Request it at order time. The blind seals the front glass after service hours and is essential in shops with steep overnight temperature swings or outdoor locations.

Check gaskets quarterly — they harden over 3–4 years in busy kitchens. Hinges rarely need attention if the cabinet is level. Annual servicing keeps them in spec; call 01792 732702 for a technician visit.
See it in our Swansea showroom

Compare kit side by side and discuss delivery with the Craven team.

If you have any questions about the Williams R70SCD Multideck with Hinged Door – Stainless Steel – HEH162 then please get in touch.

You may also be interested in...